Tile Calculator

Find out how many tiles and boxes to buy for a floor, wall, backsplash or shower. Enter the size of each area, subtract doors, windows or built-ins, pick your tile size and layout pattern, and the calculator adds a visible waste allowance. You see the formula with your own numbers, so you can check every step before you order.

Units
Project
Floor areas

Split L-shaped or irregular spaces into rectangles. Feet: 10.5 or 10' 6"

Area 1
Areas to exclude

Kitchen islands, tubs, built-in cabinets — anything you will not tile.

Tile size
Common sizes:

Extra for cuts, breakage and future repairs.

Boxes and price (optional)
Box information

Printed on the box or the product page.

Advanced options

Wider joints mean slightly fewer tiles. Fractions like 1/8 work.

Result

Tiles to buy108
Result
Area to tile100 sq ft
Area including waste110 sq ft
Tiles before waste97.95 (≈ 98)
Tiles including 10% waste108

How this was calculated

  1. Area to tile10 × 10 = 100 sq ft
  2. Tile with grout joint(12 + 0.125) × (12 + 0.125) in = 147.02 sq in = 1.0209 sq ft
  3. Tiles before waste100 ÷ 1.0209 = 97.95
  4. Tiles to buyround up(97.95 × 1.1) = 108

Planning estimate, not a purchase list. Check the coverage printed on the manufacturer's box and buy all tiles from the same batch (dye lot).

How to use the tile calculator

  1. Choose the project type and your units (US or metric).
  2. Enter the length and width of each area. Use several areas for L-shaped rooms or several walls.
  3. Add openings or built-ins you will not tile, such as doors, windows or a kitchen island.
  4. Pick the tile size and layout pattern. The waste allowance updates to a typical value for that pattern.
  5. Optionally add tiles per box and a price to get boxes and an estimated cost.

How to measure floors and walls for tile

Measure each floor area wall to wall at its longest and widest points, in feet or meters. If the room is L-shaped, split it into two rectangles and enter both. Round each measurement up to the next inch or centimeter rather than down.

For walls, measure the width along the floor and the height you plan to tile — full height, wainscot height, or to the top of the shower surround. Measure doors and windows separately and add them as openings.

For a backsplash, measure each run between the countertop and the bottom of the upper cabinets. Small outlets can be ignored; large windows or a range hood gap should be subtracted.

Tile waste by pattern

Every layout produces cut pieces at the edges. Patterns with angled or staggered tiles create more off-cuts. These are the starting values the calculator suggests — you can change them:

PatternStarting wasteWhy
Straight (grid)10%Simple layout; cuts only at the edges.
Running bond (offset)12%Staggered rows add cuts at both ends of each row.
Diagonal15%Tiles set at 45° are cut along every edge.
Herringbone15%Many angled cuts; add more for small rooms.

Add a few percent more for rooms with many corners, for large-format tiles, and if you want spare tiles for future repairs.

Tile calculator formulas

Area to tile
sum(length × width of each area) − sum(openings)
Tile module
(tile width + grout joint) × (tile height + grout joint)
Tiles before waste
area to tile ÷ tile module
Tiles to buy
round up(tiles before waste × (1 + waste % ÷ 100))
Boxes
round up(tiles to buy ÷ tiles per box)
Boxes by coverage
round up(area including waste ÷ coverage per box)

Worked example

  1. A 12 × 10 ft bathroom floor = 120 sq ft.
  2. 12 × 24 in tile with a 1/8 in joint: module = 12.125 × 24.125 = 292.52 sq in = 2.0314 sq ft.
  3. Tiles before waste = 120 ÷ 2.0314 = 59.07.
  4. Straight layout, 10% waste: 59.07 × 1.10 = 64.98, rounded up to 65 tiles.
  5. 8 tiles per box: 65 ÷ 8 = 8.13, rounded up to 9 boxes (72 tiles, 7 left over).
  6. At $38 per box the tile costs 9 × $38 = $342.

Assumptions

  • Areas are treated as rectangles; split complex shapes into several rectangles.
  • The waste allowance is a starting estimate, not an exact property of your layout. Complex rooms and large tiles may need more.
  • The grout joint is added to one tile's width and height to form a repeating module.
  • Purchase quantities are rounded up to whole tiles and whole boxes.
  • Cost covers everything you buy, including leftovers in the last box.

FAQ

How many tiles do I need for 100 square feet?

With 12 × 12 inch tiles and no grout joint, 100 sq ft needs 100 tiles before waste. With a 10% waste allowance you would buy 110 tiles. A 1/8 inch grout joint makes each tile cover slightly more area, bringing it to about 108 tiles.

How much extra tile should I buy?

About 10% for a straight layout, 12% for running bond and around 15% for diagonal or herringbone. Add more for small rooms with many corners or for large-format tiles, and keep a few spare tiles for future repairs.

Should I include the grout joint in the calculation?

Yes, if you know the joint width. Each tile covers its own area plus half the joint on every side, so including the joint gives a slightly lower and more realistic count. For very thin joints the difference is small.

How do I calculate tile for a wall with a door or window?

Enter the full wall width and height, then add each door and window as an opening. The calculator subtracts the openings from the wall area before counting tiles.

How many boxes of tile do I need?

Divide the number of tiles to buy by the number of tiles in one box and round up. If the box lists coverage instead, divide the area including waste by the coverage per box and round up.

Why does the calculator round up?

You cannot buy part of a tile or part of a box, so purchase quantities are always rounded up. Intermediate values such as tiles before waste are shown unrounded so you can check the math.

  • Drywall Calculator Coming soon

    Sheets, mud, tape and screws for rooms.

  • Gravel Calculator Coming soon

    Cubic yards, tons and bags for driveways and paths.